Q-253 is an aggressive tack, butyl gasket for subgrade vault structures formulated to provide excellent adhesion to unprimed concrete surfaces.
Q-63 is a versatile hot melt that can serve as both a gasket and as a sound deadening material. Q-63 cures instantly, applies cleanly, and creates a better seal than two-part polyurethane systems.
Q-757 boasts many of the same characteristics as Q-707, but is a skinning sealant that features superb slump resistance. It too is available in black, grey, white, and bronze.
Q-0269 Aluminized Sealant
Formulated to adhere well to all metals, Q-0269 is a highly versatile sealant that features an aluminum composition and excellent resistance to heat, weathering, and UV exposure.
Q-16 is well suited suited for use as a glass bedding compound and perimeter seal for styrene based door-lites. It features tremendous elastomeric and adhesive characteristics.
Q Non-Skinning Butyl Sealant is a non-skinning, non-drying, self-healing synthetic rubber-based designed for standing seam applications in the metal building industry.
Q-263 Seam and Repair Tapes
Edge’s Q-263 line is a complete, one part solution for roof repairs, seaming, and waterproofing. Q-263 tape products do not oxidize, crack, or harden over time, boast long life cycles, and increase roof system efficiency. Check out our branded BITE™ tapes at Plioseal.
Q-707 is a premium, architectural butyl caulk. It is a non-skinning sealant that cures into a flexible bead. Q-707 is available in black, grey, white, and bronze.
Q-41 is a moisture and air resistant thermally applied mastic that is excellent for use as a retaining compound for snap-lock flange systems.
Q-19 Window and Door Flashing Tape
A high performance block co-polymer backed window and door flashing capable of a wide range of temperature and surface performance. This product is custom printable for your branding needs. For Edge’s branded window and door flashing tapes, check out our brand Plioseal
Q-201 Cork Tape
Q-201 is an insulation tape composed of cork, asphalt, and butyl rubber. This distinct blend of materials makes this product an excellent choice for HVAC applications, as well as for insulating hot water pipes.
Featuring high levels of tack, tensile strength, and pliability, Q-7211 is a non UL rated general purpose HVAC flange gasket.
303 Glazing Tapes
303 is an architectural tape designed for window sealing applications. It is available as traditional 303 butyl glazing tape and also as a shim tape with an embedded EPDM rod added for enhanced strength.
Q-126 is a premium, versatile butyl gasket tape that has a rich tradition of service in the metal building and roofing industries.
Q-23 is a foam-in-place gasket that is easily applied in a solid or foamed state through nitrogen injection.
Q-217 Flexible Window and Door Flashing
Q-217 flexible window and door flashing tape is a creped high-density polyethylene (HDPE) with a premium butyl adhesive flashing tape that features enhanced flexibility and malleability. Ideal for sil pans and round and quarter round windows. For Edge’s branded flexible flashing, check out Plioseal.
Q-15 is a general purpose hot melt adhesive ideally suited for use as a backing to tapes and as a laminate to foams. Q-15 also provides excellent adhesion to unprimed concrete and plastics.
Formulated to withstand service temperatures in excess of 400 degrees Fahrenheit, Q-7254 is a curing product designed for use in high heat, high pressure, vacuum bagging applications.
Q-221 is formulated to withstand exposure to most hydrocarbon contaminants. As such, it is well suited for use as a sealant in utility vaults, grease pits, fuel containment tanks, septic tanks, and other underground structures.
Q-53 is an elastomeric hot melt adhesive designed as a solution for the peel and stick commercial roofing market. It provides long term hold and will work anywhere where aggressive adhesion is desired.
Q-7610 is a non-curing tape designed for use in low to mid-level heating environments. Applications can withstand multiple debulking cycles. This tape is colored green to denote its non-curing composition.
Designed to improve product efficiency, Q-101 is a hot melt adhesive that is formulated to allow manufacturers to take full advantages of automation and instant set times.
Q-7205 is a premier product featuring UL approval and optimal gasket tape characteristics.
Q-207 is a premium, butyl adhesive and woven polyethylene flashing laminate formulated to meet any market specification for window installation.
Q-25 is a thermally applied gasket with variable hardness and no residual tack, and is ideally suited for sealing around access doors and other openings.
Q-0273 Premium Sealant
Q-0273 is a premium, solvated sealant that cures into an elastomeric bead. Q-0273 is formulated to provide high levels of adhesion to glass, metal, brick, and most other construction materials.
Q-10005 Acrylic Roof Coating
Unique high-performance cross-linking elastomeric roof coating available in multiple colors and packaging options. To learn more about our branded coating, Acrylink G™ visit our brand site Plioseal.
Edge Adhesives is proud to offer this next generation sealant. Q MS delivers superior performance without any harmful solvents or isocyanates in its composition.
Formulated to provide different cure profiles, Q-7312 can be used across a broad temperature range with cure times depending on heat and pressure.
Q-7361FR Acoustic Dampening Material
In addition to the sound damping qualities of standard ADM, the ADM-FR version also boasts tremendous flame resistance and meets specifications for FAA test FAR 25.856(a).
Q-257 is a versatile, concrete gasket that is ASTM C-990 compliant and is available in multiple profiles.
Q-7361 Acoustic Dampening Material
One of the signature products manufactured by Edge Adhesives, Q-7361 is a laminate of premium butyl adhesive and .004″ aluminum facing used for anti-vibration and sound dampening.
Q-14 is an excellent replacement to two part seam and primer tape systems. This self-adhering product is an “instant tack” adhesive and is ideally suited for applications involving irregular surfaces and concrete.
Q-18 is designed for use as a replacement to moisture-cure polyurethanes. Q-18 is easy to use and applies cleanly, thus improving efficiency and reducing build assembly time.
Q-54 is a thermally applied gasket that has been designed for use during the roll forming process. It is a non-foamed hot melt that serves as an excellent alternative to stringy and messy butyl caulks.
Q-17 is a thermally applied adhesive designed for glazing and lamination applications.
Q-0274 Flexible Sealant
Q-0274 is well-suited for use as a sealant in kitchen, bathroom, and framing applications. It adheres well to all surfaces, and cures into a flexible, water resistant bead.
Q-207-60 is a durable material that boasts tremendous weather ability, and exceeds all of the requirements for use in the single ply roofing industry for splicing material.
Q-220 is a proprietary, controlled-swell, hydrophilic gasket that is capable of reproducing its swell more and resisting higher hydrostatic head pressure than traditional bentonite based gaskets.