HVAC

Q-607G is a high performing-easy application retaining compound designed for the Metal Roofing Industry. Q-607G was designed as a high solids butyl based compound for joint seams. It can be used in standing seam roof and wall panels and is also useable for buttering or bedding non-porous members squeezed together during fastening. Q-607G can be used for field caulking of interior panel joints and to separate dissimilar metals to prevent galvanic action. Q-607G adheres well to a variety of metals and metal finishes including but not limited to Galvalume, Kynar, stainless steel, PVDF, aluminum and fiberglass. Q-607G adheres to oily metal surfaces.

Q-606 is a high performing-easy application retaining compound designed for the Metal Roofing Industry. Q-606 was designed as a high solids butyl based compound for joint seams. It can be used in standing seam roof and wall panels and is also useable for buttering or bedding non-porous members squeezed together during fastening. Q606 can be used for field caulking of interior panel joints and to separate dissimilar metals to prevent galvanic action. Q606 adheres well to a variety of metals and metal finishes including but not limited to Galvalume, Kynar, stainless steel, PVDF, aluminum and fiberglass. Q606 adheres to oily metal surfaces.

This version of our Mastomeric series was designed to transverse two different plains of similar of dissimilar materials commonly found in roof construction such as end laps, roof seams, window flashings, joints, valley gutters and fasteners. No priming is required. This product can also be used for repairing elastomeric membranes on single-ply roofs.

This product was formulated to provide insulation and to prevent condensation on pipes, fittings, and tubing used in heating, air conditioning, refrigeration, and plumbing. It can also be used on hot water pipes.

Mastagum is a soft, permanently pliable, water-resistant sealant having a wide variety of applications. It has the unique quality of retaining the same consistency throughout its application range of 20°F to 140°F (-7° to 60°C).

This product is a high quality, trimmable joint and end lap sealing tape developed for use in the metal building industry. It has extremely good adhesion to Galvalume©, Kynar©, aluminized metal, and other coated metal surfaces.

Edge Adhesives Thermal Mastic is a heat conducting compound that increases heat transfer four times the amount from expansion valves and controls when connecting the sensor bulb to the suction line, better heat transmission between coils and liners. Thermal Mastic has a working temperature range from -60ºF to 212ºF (-76ºC to 100ºC) and is available in 4 convenient sizes for virtually ay application. To enhance the performance of these and other temperature sensitive components that rely on surface-to-surface heat transfer, use Edge Adhesives Thermal Mastic.