Extruded Tapes

Q-607G is a high performing-easy application retaining compound designed for the Metal Roofing Industry. Q-607G was designed as a high solids butyl based compound for joint seams. It can be used in standing seam roof and wall panels and is also useable for buttering or bedding non-porous members squeezed together during fastening. Q-607G can be used for field caulking of interior panel joints and to separate dissimilar metals to prevent galvanic action. Q-607G adheres well to a variety of metals and metal finishes including but not limited to Galvalume, Kynar, stainless steel, PVDF, aluminum and fiberglass. Q-607G adheres to oily metal surfaces.

Q-606 is a high performing-easy application retaining compound designed for the Metal Roofing Industry. Q-606 was designed as a high solids butyl based compound for joint seams. It can be used in standing seam roof and wall panels and is also useable for buttering or bedding non-porous members squeezed together during fastening. Q606 can be used for field caulking of interior panel joints and to separate dissimilar metals to prevent galvanic action. Q606 adheres well to a variety of metals and metal finishes including but not limited to Galvalume, Kynar, stainless steel, PVDF, aluminum and fiberglass. Q606 adheres to oily metal surfaces.

Q254 is a flexible gasket sealant designed to meet the requirements of post cure vacuum bag cycles. It is intended for use with most bagging films and can be used on composite tool surfaces. It will function in vacuum processing cycles giving a positive seal even up to extended use at 400°F (204°C)

This version of our Mastomeric series was designed to transverse two different plains of similar of dissimilar materials commonly found in roof construction such as end laps, roof seams, window flashings, joints, valley gutters and fasteners. No priming is required. This product can also be used for repairing elastomeric membranes on single-ply roofs.

This product was designed to control the ingress and egress of water at control joints in concrete and dissimilar products. The design of this product is such that it will swell between 200% and 300%.

Mastosplice (Type1) is a tough, durable material that has superior resistance to the elements. It meets or exceeds all requirements of the single ply roofing industry for splicing material.

This product is a quality sealing tape developed for use in metal duct connection systems and metal building construction. It has been used successfully for over twenty years. During this time, the tape has been tested for sensitivity to numerous chemicals normally found in duct work and a library of chemical resistance data has been developed. Q-205 has the widest range of application temperatures (see Hardness and Force to Compress) of any competitive material ensuring a positive seal and ease of application under extreme conditions. It is a non-hardening and has an extremely good adhesion to galvanized, Galvalume©, aluminized metal, stainless steel and other metal surfaces.

This product was formulated to provide insulation and to prevent condensation on pipes, fittings, and tubing used in heating, air conditioning, refrigeration, and plumbing. It can also be used on hot water pipes.

Mastagum is a soft, permanently pliable, water-resistant sealant having a wide variety of applications. It has the unique quality of retaining the same consistency throughout its application range of 20°F to 140°F (-7° to 60°C).

This product is a high quality, trimmable joint and end lap sealing tape developed for use in the metal building industry. It has extremely good adhesion to Galvalume©, Kynar©, aluminized metal, and other coated metal surfaces.